Net-optics 10_100 to Triple-speed Port Aggregator Manual do Utilizador descarregar pdf (Página 12)

10/100 to Triple-speed Port Aggregator

Cabling Guidelines

Use straight-through cables to connect the Network ports to routers or NICs.

Use cross-over cables to connect the Network ports to switches and hubs. The

Network ports transmit on pins 3 & 6 and receive on pins 1 & 2.

Note: ________________________________________________________________

Network Ports A and B automatically detect and match the speed and duplex

settings of the attached network devices.

______________________________________________________________________

Connecting to the Network

1. Connect Network Port A to the appropriate network device following the

cabling guidelines above.

2. Connect Network Port B to the appropriate network device following the

cabling guidelines above.

3. Verify that the Tap Network Ports are cabled in-line between two devices.

Figure 5: Connecting to the Network

www.netoptics.com

Port Aggregator

Network Monitor

A B

100

1000

LINK

ACT

In-Line

To network switch or router

1 2 ... 7 8 9 10 11 12 13 14 15 16

Sem comentários

Net-optics 10_100 to Triple-speed Port Aggregator Manual do Utilizador Página 12