Net-optics 10_100BaseT Multi-Station Tap Manual do Utilizador descarregar pdf (Página 10)

10/100 Multi-Station Tap

Cabling Guidelines

• If connecting to Switches or Hubs, use CAT5 RJ45 cross-over cabling.

• If connecting to Routers or NICs, use CAT5 RJ45 straight-through

cabling.

Connecting to the Network

1. Connect Network Port A to the appropriate switch, server or router using a

CAT5 cable.

2. Connect Network Port B to the appropriate switch, server or router using a

CAT5 cable.

Figure 12: Connecting to the Network

3. Verify that the Tap Network Ports are cabled in-line between two devices.

4. Repeat Steps 2-3 for each network you wish to Tap and Monitor.

18 17

14 13

10 9

6 5

2 1

Network Ports

To network switch or router

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Net-optics 10_100BaseT Multi-Station Tap Manual do Utilizador Página 10